Event Name

2025 SEAISI Conference & Exhibition

Event Venue

Jakarta Convention Center, Indonesia

Event Date

21 May 2025 - 24 May 2025

About this event

SEAISI’s 2025 Conference & Exhibition will take place from 21–24 May 2025 at the Jakarta Convention Center, Indonesia. Take this opportunity to connect with leading figures in the steel industry, gain valuable insights from renowned experts, and explore new opportunities. Over three days, delve into the steel industry’s landscape and unlocking key strategies for the ASEAN steel industries. This is the event that you are looking for!    

Supported by:

                                      

                                                             

 

enlightened EARLY BIRD PAYMENT SHOULD BE MADE BY OR BEFORE 18th OF APRIL 2025

 

Contact

Contact No: +603 5519 1102

Email: event@seaisi.org

MEMBER REGISTRATION



Event

NON MEMBER REGISTRATION



Event

HOTEL ACCOMODATION

Favourable accommodation rates have been negotiated with The Sultan Hotel & Residence Jakarta. Please reserve your room after successfully registering for the Conference & Exhibition. Click here for Room Reservation. Only limited number of rooms will be available. Please refer to the terms & conditions for the online room reservations regarding room cancellation and no show.

Please contact SEAISI at event@seaisi.org if you want to reserve 10 or more rooms.

The Sultan Hotel & Residence Jakarta

Jl. Gatot Subroto, RT.2/RW.1, Gelora, Kecamatan Tanah Abang, Kota Jakarta Pusat, Daerah Khusus Ibukota Jakarta 10270, Indonesia

Phone: +62 21 5703600

Room Rate: 

Deluxe

IDR 1,200,000 (~USD 72,9)

Grand Deluxe

IDR 1,400,000 (~USD 85,05)

 

Event Name

2025 SEAISI Conference & Exhibition

Event Venue

Jakarta Convention Center, Indonesia

Event Date

21 May 2025 - 24 May 2025

EXHIBITION

Floor Plan

Event Name

2025 SEAISI Conference & Exhibition

Event Venue

Jakarta Convention Center, Indonesia

Event Date

21 May 2025 - 24 May 2025

2025 SEAISI Conference & Exhibition

PRE-CONFERENCE DAY (TUESDAY, 20 MAY 2025)

14:00PM-18:00PM - Pre-Registration Sultan Hotel New Lobby -
17:30PM-18:30PM - Chairpersons & Speakers Briefing - -
19:00PM-21:00PM - Welcome Reception Sultan Hotel, New Lobby -

2025 SEAISI Conference & Exhibition (WEDNESDAY, 21 May 2025)

OPENING CEREMONY

07:30AM-08:00AM - Registration - -
08:45AM-09:00AM - Housekeeping Announcement - -
09:00AM-09:10AM Mr.Akbar Welcoming Address by, Mr.Akbar, Chairman of IISIA, President of PT Krakatau Steel, and SEAISI Director from Indonesia - PT Krakatau Steel, and SEAISI Director from Indonesia
09:10AM-09:20AM Dato Lim Hong Thye Opening Address by Dato Lim Hong Thye, Chairman of South East Asia Iron and Steel Institute (SEAISI) - -
09:20AM-09:40AM - Special Address by Minister - -
09:40AM-10:40AM - TOUR OF EXHIBITION/ NETWORKING BREAK - -

KEYNOTE SESSION - Unlocking Key Strategies for the ASEAN Steel Industries(MODERATOR - Ronald Joel C. Magsajo)

10:40AM-11:10AM Dr.Edwin Basson` Keynote Speech - World Steel Association
11:10AM-11:40AM Anthony de Carvalho Keynote Speech - Organization for Economic Co-operation & Development (OECD)
11:40AM-12:10AM Dr. Kanchana Wanichkorn Keynote Speech - ASEAN Economic Community Department, ASEAN Secretariat

CEO Panel Discussion / Q&A

12:30PM-13:00PM Frank Zhong Presentation 1 - World Steel Association
12:30PM-13:00PM Pieter Parmentier Presentation 2 - Organization for Economic Co-operation & Development (OECD)
12:30PM-13:00PM Dr. Kanchana Wanichkorn Presentation 3 - ASEAN Secretariat
12:30PM-13:00PM Muhamad Akbar Djohan Presentation 4 - PT KRAKATAU STEEL (PERSERO), TBK

SESSION 1 - REGIONAL DEVELOPMENTS(Chairperson - Wellington Tong)

14:15PM-14:35PM Yeoh Wee Jin ASEAN Steel Industry at the Crossroad in the Era of Tariffs and Changing World Order - SEAISI
14:35PM-14:55PM Tomas Gutierrez Can China’s New Era Support Steel Markets? - Kallanish
14:55PM-15:15PM Sachin Shetty Reshaping Steel: Updates of India's Position in the Global Steel Landscape - Quesrow Consulting, India
15:15PM-15:35PM - Panel Discussion/ Q&A - -
15:35PM-16:05PM - NETWORKING BREAK - -

SESSION 2 - Green Steel Revolution: Opportunities, Challenges, and Market Evolution(Chairperson - Eugene Ng )

16:05PM-16:25PM Shankhadeep Mukherjee CBAM (Carbon Border Adjustment Mechanism) and Its Complexity - CRU
16:25PM-16:45PM Zihuan Pan Making Sense of Green Steel Pricing and Market Developments - Fast Markets
16:45PM-17:05PM Bonnie Zuo How Equipment, Green Hydrogen, and Carbon Prices/Cost Factors Influence Steel Companies' Low-Carbon Financing Needs in China - Transition Asia
17:05PM-17:25PM - Panel Discussion/ Q&A - -
19:00PM-22:00PM - Welcome Dinner - Hosted by Indonesia Iron and Steel Industry Association (IISIA) - -

2025 SEAISI Conference & Exhibition (Thursday, 22 May 2025)

SESSION 3 - Where Should ASEAN Policies be Heading to, for Decarbonization and Standards? Potential pathways and requirements

08:30AM-08:40AM Benjamin O. Yao Presentation 1 Presentation from Benjamin O. Yao Steel Asia Manufacturing Corporation, Philippines
08:40AM-08:50AM Andrew Fan Presentation from Andrew Fan - Meranti Steel
08:50AM-09:50AM - Policy Maker Panel Discussion Apit Pria Nugraha, Head of Centre for Green Industry - Ministry of Industry of Indonesia -
08:50AM-09:50AM - Policy Maker Panel Discussion Faizal Mohd Yusof, Senior Director - Ministry of Investment, Trade and Industry (MITI) Malaysia -
08:50AM-09:50AM - Policy Maker Panel Discussion Wirote Rotewatanachai, President of Iron and Steel Institute of Thailand -
09:50AM-10:20AM - NETWORKING BREAK - -

SESSION 4 - COUNTRY REPORTS I (Chairperson - Mr. Yeoh Wee Jin)

10:20AM-10:35AM Director of Indonesia Country Report 1 Update on Iron & Steel Industry Situation in Indonesia The Indonesian Iron and Steel Industry Association
10:35AM-10:50AM Director of Korea Country Report 2 Update on Iron & Steel Industry Situation in Korea Korea Iron and Steel Association
10:50AM-11:05AM Director of Malaysia Country Report 3 Update on Iron & Steel Industry Situation in Malaysia Malaysian Iron and Steel Industry Federation
11:05AM-11:20AM Director of Myanmar Country Report 4 Update on Iron & Steel Industry Situation in Myanmar Myanmar Steel Association
11:20AM-11:35AM Director of Philippines Country Report 5 Update on Iron & Steel Industry Situation in Philippines Philippine Iron and Steel Institute

SESSION 5 - COUNTRY REPORTS II (Chairperson - Mr. Yeoh Wee Jin)

11:35AM-11:50AM Director of Singapore Country Report 6 Update on Iron & Steel Industry Situation in Singapore National Committee, Singapore
11:50AM-12:05PM Director of Taiwan Country Report 7 Update on Iron & Steel Industry Situation in Taiwan Taiwan Steel & Iron Industries Association
12:05PM-12:20PM Director of Thailand Country Report 8 Update on Iron & Steel Industry Situation in Thailand Iron and Steel Institute of Thailand
12:20PM-12:35PM Director of Vietnam Country Report 9 Update on Iron & Steel Industry Situation in Vietnam Vietnam Steel Association
12:35PM-13:55PM - LUNCH BREAK - -

SESSION 6 A - Pathway to Green Steel Application( Chairperson - Pek Hoong Chong)

13:45PM-14:05PM Jia-Uei Chan The Path to Decarbonization: Green Steel in ASEAN's Steel Industry - SMS Group
14:05PM-14:25PM Cyril Duchanois Decarbonizing the Steel Industry: A Global Multi-Energy Company Perspective - TotalEnergies
14:25PM-14:45PM Lapasin Marco Flexible Pathways for Iron Production - Danieli
14:45PM-15:05PM Eduardo Pfiffer Pathways for Steel Decarbonization through Flexible Iron Ore Solutions - Vale, Malaysia

SESSION 6 B - Solutions for Reducing Carbon Emission(Chairperson - Somsak Pikkanesuan)

13:45PM-14:05PM Svetina Massimiliano Danieli Green transformation initiative for a new galvanizing line - Danieli
14:05PM-14:25PM Harsh Choudhry Approaches to Carbon Emissions Measurement and Reporting for Steel Companies - sentra.world
14:25PM-14:45PM Hsun-Yu Lin Energy Reduction of CO2 capture by developing new absorbents - China Steel Corporation, Taiwan
14:45PM-15:05PM Jiun Horng Tsai Iron and Steel Industry in Facing the Carbon Tax in Taiwan - National Cheng Kung University, Taiwan
15:05PM-15:35PM - NETWORKING BREAK - -

SESSION 7 A - Digital Transformation in Steel (Chairperson - Ng Kek Loon)

15:35PM-15:55PM Dr. Alexander Fleischanderl The Steel Industry – Setting the Standard for the Twin Transition - Primetals Technologies Ltd.
15:55PM-16:15PM M Skalidakis Strand Condition Monitoring for Improved Continuous Caster Productivity & Control - Sarclad
16:15PM-16:35PM Armando Vazquez Acoustic sensing for improved EAF process control and risk mitigation - Tenova Goodfellow Inc., Canada
16:35PM-16:55PM YAP Chin Seng Digitalising Global Warming Potential Data in Steel Supply Chain - UK cares,UK
16:55PM-17:15PM Lorenzo Croce From Digital Twin to the Digital Product Pass as a Key Technology for the Transition to Circular Economy - celano GmbH

SESSION 7 B - Improving Processes for Enhanced Efficiency (Chairperson - Mike Nitschke)

15:35PM-15:55PM Roberto Miccoli Life Cycle Partnership - SMS Group
15:35PM-15:55PM Florian Jungen Life Cycle Partnership - SMS Group
15:55PM-16:15PM Fu Jian Hui High-speed large reduction single-stand six-roll reversible cold rolling mill innovation and performance optimization - MCC-SFRE Heavy Industry Equipment Co.,Ltd., China
16:15PM-16:35PM Davide Masoero Design Criteria for Electric Arc Furnaces Utilizing DRI, HBI, and Virgin Iron Units: Enhacing Efficiency and Sustainability - Tenova
16:35PM-16:55PM Christoph Klebba iRSB – Benefits of an Intermediate RSB in Special Steel Rolling Mills - Friedrich Kocks GmbH & Co KG, Germany
16:55PM-17:15PM Tim Oliver , Carl Bechem GmbH SMART Grease Selection for Casters and Rolling Mills to Reduce Maintenance Cost and Extend Bearing Life. - Bechem Lubrication Technology, Germany

2024 SEAISI Conference & Exhibition (Friday, 23 May 2025)

SESSION 8 A - Advancing Steel Raw Material Technology(Chairperson - Joel T. Ronquillo)

09:00AM-09:20AM Joao Souto Lower Total Cost of Ownership in Commodity Grade Structural Steels by Optimizing Alloy Design with Ultra-low Niobium - CBMM, Singapore
09:20AM-09:40AM Ayhan Tugrul Scrap Metal Sourcing in Steel Production: Sustainability Practices and Challenges - UK Cares, UK
09:40AM-10:00AM Dr.- Ing. Carlos Lamsfus Premium Quality Scrap: A Dual Strategy for Cost Reduction in Steel Production - ZB Group, Spain
10:00AM-10:20AM Gunter Busch High-Grade Steel Scrap as Raw Material for the Efficient Production of High-Grade Steel - ALD Vacuum Technologies (Thailand) Co. Ltd. , Thailand

SESSION 8 B - Quality Improvement on Steel Products(Chairperson - Mochamad Ibnu Sina)

09:00AM-09:20AM Ryutaro Ota Skin Pass Mill & Tension Lever for Ultra-High Strength Steel - JP Steel Plantech Co., Ltd., Japan
09:20AM-09:40AM Richard Rak Optical Flatness Measurement of Strip, Sheet and Plate in Process Lines and Metal Service Centres - IMS Messsysteme GmbH, Germany
09:40AM-10:00AM Francisco Moretón Díez Surface Defects Analysis in Hot-Rolled Long Products: Synchronizing Eddy Current and Computer Vision for Quality and Process Control Optimization Using Artificial Intelligence. - Ingenieria y Sistemas de Ensayos No Destructivos (ISEND S.A)
10:00AM-10:20AM Dr.Dominik, Recker Highest Steel Surface Quality and Process Efficiency Powered by 2D & 3D Inspection of Surface Defects and Waviness Recognition - ISRA Vision Korea Co., Ltd., Korea
10:20AM-10:50AM - NETWORKING BREAK - -

SESSION 9 A - Implementation of Green Technology(Chairperson - Nita Anggreani)

10:50AM-11:10AM Narduzzi Omar Innovative Solutions for Sustainable Steel Production: De-Risking the Future with DANIELI Technology - Danieli
11:10AM-11:30AM Carlo P. Piemonte/ Kelvin Fu Indonesian Steel industry “Goes Green” with GRP and Arvedi ESP. - Primetals Technologies Austria GmbH, Austria, PT Gunung Raja Paksi Tbk., Indonesia
11:30AM-11:50AM Jenny Selway The Role of Cooperative Research and Industry-Research Collaboration in Driving Innovation for Decarbonization of Iron and Steel - HILT CRC, Australia

SESSION 9 B - Advancement of Eco-friendly Steel Manufacturing(Chairperson - Darren Chua)

10:50AM-11:10AM Dr. Vincent Chevrier Development and demonstration of an electric heater for direct electric heating of MIDREX® Process Gases - Midrex Technologies, Inc., USA
11:10AM-11:30AM Dr.Joachim Von Scheele Driving Decarbonization Through Energy-Efficiency, Hydrogen, and Carbon Capture - Linde Gases , Malaysia
11:30AM-11:50AM Zulfiadi Zulhan Hydrogen Plasma Smelting Reduction: A Pathway to Green and Sustainable Metal Production - Bandung Institute of Technology, Indonesia
11:50AM-13:05PM - LUNCH BREAK - -

SESSION 10 A - Continuous Technological Advancement in Steel Industry (Chairperson - Tim Oliver)

13:05PM-13:25PM Bintang Bergas/ Bernhard Steenken Developing Electromagnetic Flow Control Mold for High Flexibility Thin to Medium Slab Casting - ABB Metallurgy
13:25PM-13:45PM Yoshiaki Kusaba Development of Large U-Type Sheet Pile Rolling Method - JP Steel Plantech Co. Ltd., Japan
13:45PM-14:05PM Mike Nitschke The Importance of Solid Mechanical Design in Roll Grinding Machines: A Technical Overview - H. Kleinknecht & Co., GmbH, Germany
14:05PM-14:25PM Keno Sparenborg Ladle Sandman®+: Advancing Automated Ladle Well Block Filling and Refractory Monitoring - Badische Stahl-Engineering GmbH, Germany
14:25PM-14:45PM Laurent Lesne Continuous Galvanizing Lines Improved Profitability Thanks to Coatings Optimization - Fives KEODS, France
14:45PM-15:05PM Alexander Zeischka Grinding, the green surface removal process - BRAUN Maschinenfabrik GmbH, Austria

SESSION 10 B - Innovative Approaches to Steel Product Development (Chairperson - Ng Kek Loon)

13:05PM-13:35PM Elmar Krieg Advanced Technologies for Economical Rolling of Rails and Sections - SMS Group
13:25PM-13:45PM Li Li-Yuan Development of Ultra-High Strength Steels with Excellent Functions for Automotive Application - China Steel Corporation, Taiwan
13:45PM-14:05PM Hao Yun Yu Study on the Optimization of Internal Microstructure of Walsin 440M Steel Billets and Wire Rods by EMS - Walsin Lihwah Corporation, Taiwan
14:05PM-14:25PM Kuan-Wei Wu Effect of Electromagnetic Stirring on the Microstructure and Mechanical Properties of High-FD Stainless Steel - Walsin Lihwah Corporation, Taiwan
14:25PM-14:45PM Yosia Samuel Manurung Development of Advanced Construction Materials for Seismic-Grade Steel - PT Krakatau Posco, Indonesia
14:45PM-15:05PM Eric Albrand Jet Vapor Deposition (JVD): The Choice for Zn Coatings of Future Steels for Automotive - John Cockerill
15:05PM-15:45PM - NETWORKING BREAK - -

SESSION 11 A - Transforming Steel Industries through the Integration of AI

15:45PM-16:05PM Tarun Mathur Artificial Intelligence Applications for Operational Excellence in Steel Manufacturing - ABB Metallurgy
16:05PM-16:25PM Anna Mayrhofer From Equations to Insights: Enhancing Converter Automation with Intelligent Modeling - Primetals Technologies Austria GmbH, Austria
16:25PM-16:45PM Gui ZhiJun Accelerating Sustainable Steel Production: AI-Driven Carbon Management Solutions for ASEAN's Green Transition - Shanghai E-Carbon Digital Technology Co., Ltd., China
16:45PM-17:05PM Ho Van Loc AI Applications in Steel Production at Hoa Phat Dung Quat - Hoa Phat Dung Quat Steel Joint Stock Company, Vietnam
16:45PM-17:05PM Pham Viet Phuoc AI Applications in Steel Production at Hoa Phat Dung Quat - Hoa Phat Dung Quat Steel Joint Stock Company, Vietnam

SESSION 11 B - Continuous Improvement in Steel Process(Chairperson - Reza Jaya Wadhana)

15:45PM-16:05PM Yong-Hao Siao Effect of Charging Sequence on Burden Distribution in a Blast Furnace Using Discrete Element Method - China Steel Corporation, Taiwan
16:05PM-16:25PM Ross Walker How Investing in the Latest Roll Inspection Technology, Can Significantly Reduce Rollshop Running Costs, Whilst Enhancing Operator Safety and Quality Control Downstream - Sarclad Limited, UK
16:25PM-16:45PM Takeshi Umetsubo Stabilization Technologies for Ironmaking Operations under Increased Production - JP Steel Plantech Co., Ltd., Japan
16:45PM-17:05PM Fu-Sheng Tsai A Dynamic Dual-stage Learning Framework for Interpretable Coal and Iron Ore Price Trend Prediction - China Steel Corporation, Taiwan

CEO Panel Discussion for Technology: Unlocking Key Strategies for the ASEAN Steel Industries(Chairperson - Joseph Yong)

16:45PM-17:30PM - Bernhard Steenken Chief Sales Officer SMS Group
16:45PM-17:30PM - Alexander Fleischanderl Chief Technical Officer Primetals Technologies
16:45PM-17:30PM - Nicola Patrizi Managing Director Danieli
16:45PM-17:30PM - Fedaus President Director PT Gunung Raja Paksi, Indonesia

Event Name

2025 SEAISI Conference & Exhibition

Event Venue

Jakarta Convention Center, Indonesia

Event Date

21 May 2025 - 24 May 2025

Route 1

Route 2: PT. Krakatau Posco (Cilegon, Banten) - US$100 (Full)

  • Date & Time:
    Sat,24 May 2025 07:00 - 15:45
  • Dress Code:
    Smart Casual and covered shoes. (No short pants, skirt, high-heel shoes, Opened-Toe shoes and Slippers)

Max number of attendee = 30 person

TimeSchedule
07h00 - 07h15Gathering at The Sultan Hotel Lobby
07h15 - 09h00Going to Cilegon PT Krakatau Posco by bus
09h00 - 09h15Arrived at PT Krakatau Posco
09h15 - 10h30* Welcome speech by Representative from PT Krakatau Posco

* Company Introduction

* To give Sourvenier Present and take photos
10h30 - 12h00Plant visit
12h00 - 13h30Depart for Lunch & Closing
13h30 - 15h30Going back to Jakarta 
15h30 - 15h45Arrived at The Sultan Hotel Jakarta

Route 2

Route 3: PT.Gunung Raja Paksi/Garuda Yamato (Bekasi, West Java) - US$100

  • Date & Time:
    Sat,24 May 2025 07:00 - 15:45
  • Dress Code:
    Smart Casual and covered shoes. (No short pants, skirt, high-heel shoes, Opened-Toe shoes and Slippers)

Max number of attendee = 30 person

TimeSchedule
07h00 - 07h15Gathering at The Sultan Hotel Lobby
07h15 - 09h00Going to Bekasi PT Gunung Raja Paksi Tbk/Garuda Yamato Steel by bus
09h00 - 09h15Arrived at PT Gunung Raja Paksi Tbk/Garuda Yamato Steel
09h15 - 10h30* Welcome speech by Representative from PT Gunung Raja Paksi Tbk/Gunung Yamato Steel

* Company Introduction

* To give Sourvenier Present and take photos
10h30 - 12h00Plant visit
12h00 - 13h30Depart for Lunch & Closing
13h30 - 15h30Going back to Jakarta 
15h30 - 15h45Arrived at The Sultan Hotel Jakarta

If you need further information about advertising opportunities,
kindly contact SEAISI Secretariat Office

+603 5519 1102

seaisi@seaisi.org